GLSF Free-Jet Boiler Burner
 GLSF Free-Jet Boiler Burner Brochure (PDF, 2.1 MB) |
 Turnkey Boiler Burner Solutions Brochure (PDF, 6.5 MB) |
 GLSF Free-Jet Boiler Burner Video |
GLSF Free-Jet Boiler Burner Video #2 |
Power Products
 |
Burner Description:
The Zeeco GLSF Free-Jet burner is a Next Generation emissions round flame burner.
Burner Design Features:
- Stable flame over a wide range of conditions
- High turndown of 10:1 or greater for most cases
- Low maintenance cost since tip mass is small and exposed into firebox less than 1" (25 mm)
- Compact design makes this burner a great choice for retrofit applications
- Reasonable cost and great value
- Combustion air dampers are controlled by gears for precise control
- Bearings are used for the combustion air damper shafts for smooth, precise operation
Configurations available: plenum mounted or individual wind-box- 304 Stainless Steel fuel gas risers
- 310 Stainless Steel (Type HK) secondary gas tips
- 310 Stainless Steel (Type HK) primary gas tip
- Center swirler
Burner Design Information
| Burner Model: | GLSF Free-Jet Burner |
| Fuels: | Gas Only or Combination Oil & Gas (CLSF) |
| Description: | Round Flame Next Generation Emissions |
| NOx Reduction Method: | Internal Flue Gas Recirculation by Free-Jet Mixing |
| Predicted NOx Emissions Range: | 8 ppmv wth 30% EFGR |
| Predicted NOx Emissions Range: | 13 ppmv wth 20% EFGR |
| Predicted NOx Emissions Range: | 16 ppmv wth 15% EFGR |
| Predicted NOx Emissions Range: | 20 ppmv wth 10% EFGR |
| Predicted NOx Emissions Range: | 30 ppmv wth 0% EFGR |
| Combustion Air Induction: | Forced Draft |
| Mounting Options: | Side-fired |
| Forced Draft Heat Release Range: | 1 MM to 350 MM Btu/hr [0.293 to 102.55 MW] |
| Turndown: | 10:1 |
| Typical Excess Air Range: | 10% to 25% |