AC Combination Round Flame Burner
Burner Description:
The Zeeco AC round flame combination oil and gas burner.
Burner Design Features:
- Stable flame over a wide range of conditions
- High Turndown of 5:1 or greater for most cases
- No stabilization metal used in the burner throat
- Low maintenance cost since tip mass is small and exposed into firebox less than 1" (25 mm)
- Reasonable cost and great value
- Combustion air dampers are controlled by gears for precise control
- Bearings are used for the combustion air damper shafts for smooth, precise operation
- Configurations available: plenum mounted or individual wind-box
- 310 Stainless Steel (Type HK) gas tips
Burner Design Information
| Burner Model: | AC Combination Oil & Gas |
| Fuels: | Combination Oil & Gas |
| Description: | Round Flame Combination |
| NOx Reduction Method: | None |
| Predicted NOx Emissions Range (Natural Draft) with gas fired: | 90 ppmv to 150 ppmv |
| Predicted NOx Emissions Range (600°F/316°C Air Preheat) with gas fired: |
120 ppmv to 250 ppmv |
| Predicted NOx Emissions Range (Natural Draft) with No. 2 oil fired: | 120 ppmv to 250 ppmv |
| Predicted NOx Emissions Range (600°F/316°C Air Preheat) with No. 2 oil fired: |
150 ppmv to 300 ppmv |
| Predicted NOx Emissions Range (Natural Draft) with No. 6 oil fired: | 250 ppmv to 400 ppmv |
| Predicted NOx Emissions Range (600°F/316°C Air Preheat) with No. 6 oil fired: |
300 ppmv to 450 ppmv |
| Combustion Air Induction: | Natural, Forced, Induced & Balanced Draft |
| Mounting Options: | Up-fired and Side-fired |
| Natural Draft Heat Release Range: | 1 MM to 20 MM Btu/hr [0.293 to 5.860 MW] |
| Forced Draft Heat Release Range: | 1 MM to 50 MM Btu/hr [0.293 to 14.65 MW] |
| Turndown: | 5:1 gas & 3:1 oil |
| Typical Excess Air Range: | 10% to 25% |