FK Low Emissions Flat Combination Flame Burner
Burner Description:
The Zeeco FK Staged Air Low Emissions Burner is a flat flame combination oil and gas burner.
Burner Design Features:
- Stable flame over a wide range of conditions
- High turndown of 5:1 or greater for most cases
- No stabilization metal used in the burner throat
- Low maintenance cost since tip mass is small and exposed into firebox less than 1" (25 mm)
- Reasonable cost and great value
- Combustion air dampers are controlled by gears for precise control
- Bearings are used for the combustion air damper shafts for smooth, precise operation
- Configurations available: plenum mounted or individual wind-box
- Mounting configurations: Horizontally mounted, vertically fired and vertically fired
- 310 Stainless Steel (Type HK) gas tips
Burner Design Information
| Burner Model: | FK Combination Oil & Gas Staged Air Burner |
| Fuels: | Combination Oil & Gas |
| Description: | Flat Flame Low Emissions Combination |
| NOx Reduction Method: | Staged Air |
| Predicted NOx Emissions Range (Natural Draft) with gas fired: | 50 ppmv to 95 ppmv |
| Predicted NOx Emissions Range (600°F/316°C Air Preheat) with gas fired: | 80 ppmv to 160 ppmv |
| Predicted NOx Emissions Range (Natural Draft) with No. 2 oil fired: | 80 ppmv to 120 ppmv |
| Predicted NOx Emissions Range (600°F/316°C Air Preheat) with No. 2 oil fired: |
120 ppmv to 180 ppmv |
| Predicted NOx Emissions Range (Natural Draft) with No. 6 oil fired: | 160 ppmv to 220 ppmv |
| Predicted NOx Emissions Range (600°F/316°C Air Preheat) with No. 6 oil fired: |
215 ppmv to 280 ppmv |
| Combustion Air Induction: | Natural, Forced, Induced & Balanced Draft |
| Mounting Options: | Up-fired and Horizontally Mounted Vertically Fired |
| Natural Draft Heat Release Range: | 1 MM to 14 MM Btu/hr [0.293 to 4.102 MW] |
| Forced Draft Heat Release Range: | 1 MM to 14 MM Btu/hr [0.293 to 4.102 MW] |
| Turndown: | 5:1 gas & 3:1 oil |
| Typical Excess Air Range: | 10% to 25% |