GLSF MIN-EMISSIONS
Down-fired Gas Burner
The picture (right) is Zeeco’s GLSF Min-Emissions down-fired burner firing with Refining Fuel Gas in the outer tips and PSA gas in the center tip.
This design provides a flame shape that is normally the same width as the outside diameter of the burner tile allowing
the burners to be installed in close proximity to each other.
Burner Description:
The Zeeco GLSF Mini-Emissions burner is an Ultra-Low emissions round flame burner.
Burner Design Features:
- Stable flame over a wide range of conditions
- High turndown of 5:1 or greater for most cases
- No stabilization metal used in the burner throat
- Low maintenance cost since tip mass is small and exposed into firebox less than 1" (25 mm)
- Compact design makes this burner a great choice for retrofit applications
- Compact flame shape
- Great heat flux profile
- Reasonable cost and great value
- Combustion air dampers are controlled by gears for precise control
- Bearings are used for the combustion air damper shafts for smooth, precise operation
- Configurations available: plenum mounted or individual wind-box
- 310 Stainless Steel (Type HK) gas tips
Burner Design Information
| Burner Model: | GLSF Min-Emissions Burner |
| Fuels: | Gas Only |
| Description: | Round Flame Ultra-Low Emissions |
| NOx Reduction Method: | Internal Flue Gas Recirculation by Free-Jet Mixing |
| Predicted NOx Emissions Range (Natural Draft): | 32 ppmv to 70 ppmv |
| Predicted NOx Emissions Range (600°F/316°C Air Preheat): | 45 ppmv to 100 ppmv |
| Combustion Air Induction: | Natural, Forced, Induced & Balanced Draft |
| Mounting Options: | Down-fired |
| Natural Draft Heat Release Range: | 1 MM to 12 MM Btu/hr [0.293 to 3.516 MW] |
| Forced Draft Heat Release Range: | 1 MM to 18 MM Btu/hr [0.293 to 5.274 MW] |
| Turndown: | 5:1 |
| Typical Excess Air Range: | 10% to 25% |