Systems and services overview.
GLSF Free Jet Ultra-Low NOx Burners
GB Low NOx Dual Fuel Burner
Register and Venturi Style Retrofit Burners
Fluid Bed Start-Up Burners and Gas Lances
Over Bed / Over Stoker Start Burners and Support Burners
DB-LN Duct Burners
Forced Draft Fans
Windbox
Fuel Trains
Burner Management System (BMS)
Combustion Control Systems
Over-Fire Air Systems
Flue Gas Recirculation (FGR)
Scanner Systems
Flexible Ignition / Warm-Up Guns for T-Fired Units
Class 1 Gas / Oil Pilots and Warm-Up Guns
Class 2 Gas / Oil Burner Support Pilots
Class 3 Gas / Oil Pilots with HE capability
Class 3 Special HE Only (Rigid and Flexible)
Z-Jet Low NOx Kits (Gaseous and Liquid Fuels)
Ultra-Low Steam Usage Atomizers and Tips
Solid State
Programmable PLC
Single Point, Parallel Point
Fully Metered Cross Limited Control
O2 Trim, VFD Fan Draft Control
Natural Gas
No. 6 Fuel Oil
No. 2 Fuel Oil
Blended Oils
Refinery Gases
Waste Oils
Opportunity Fuels
Low Btu Gases
Blast Furnace Gases
Coke Oven Gases
Landfill Gases
High-Viscosity Fuels
Start-Up
Installation Supervision
Preventative Maintenance
Service Contracts
Operator Training
Aftermarket Parts
Physical and CFD Modeling
Combustion Air Systems
Flue Gas Recirculation Systems
Over-Fire Air Systems
Exit Gas / Stack Modeling
Selective Catalytic Reduction
Environmental Compliance
Efficiency Audits
Fuel Conversions
Capacity Increase
Carbon Footprint Reduction
Coordinating Supply
Equipment Modification
Demolition / Installation
Start-Up
Operator Training
Site Management
Environmental Compliance
Efficiency Audits
Fuel Conversions
Capacity Increases
Carbon Footprint Reduction
Solid State
Programmable PLC
Single Point, Parallel Point, Fully Metered Cross
Limited Control
O2 Trim, VFD Fan Draft Control
IR, IR Flicker Frequency
UV
Low NOx and Low CO
Retrofit Kits
High Efficiency
Firing System Optimization
Opportunity Fuels
- Landfill Gas, Waste Gas, Refinery Gas
Physical / CFD Flow Modeling
Turbine Exit / Ductwork / Burner
Eliminate Vibration
Lower O2, CO, NOx, Carbon Footprint
Increase Efficiency, Turndown
Reduce System Pressure Drop
Optimize Fuel / Air TEG Mixing
Preventative Maintenance
Full Turnkey
Start-Up
Service and Repair
Cost-Effective Solutions
Opportunity Fuels
Light, Heavy, Blended Oils
Waste Oils
NFPA Class 1, 2, 3; Gas and Oil
Specialty Fuels
HE Direct Spark
Download Brochure