Aftermarket Parts
plant-drone-shot

Incinerators

Parts and Critical Replacement Components for Thermal Oxidizers

THERMAL OXIDIZER SPARE PARTS 

Blast Gate Valves

Zeeco’s blast gate valves use a stainless steel push rod whereas competitors use carbon steel rods that can corrode within the valve and freeze the operation of the gate.

Our blast gate valve uses a plated cast packing gland that allows it to be used in applications where a brass-packing gland would not be allowed.

Zeeco blast gate valves are cast from WCB cast steel, which is more ductile than cast iron used by competitors. This will help to prevent our valves from becoming brittle and cracking.

Electro galvanized components. Our blast gate valves with the exception of sliding surfaces are corrosion protected.

gfk-blastgatevalves1

Gas Tips/Cones/Diffuser

Zeeco provides gas tips, cones, and diffusers designed to meet the critical requirements of our clients.

Our gas tips are engineered and manufactured to strict tolerances to ensure our client’s equipment functions properly. Zeeco has a large inventory of investment castings for several different manufacturers of combustion equipment. We can provide replacement gas tips for virtually any burner ranging from pre-mix burners to Ultra-Low-NOx burners. Hence, Zeeco can be your single source of aftermarket components for your combustion equipment.

Zeeco cones, flame stabilizers, and pressure block devices are cast or manufactured from high-grade materials to ensure long life and performance.

Zeeco can supply a wide variety of investment cast or fabricated flame holders (also known as cones or diffusers) for round or flat flame burners.

gfk-gastips-cones1

Sight Ports / Covers

Zeeco stocks and can provide a wide variety of sight glasses, sight port covers, and sight port assemblies. Our 5" x 7" Clearview sight port assemblies are cast from HF (stainless steel) material and can be oriented vertically or horizontally to fit your specific application.

gfk-sightport5

Oil Burner Components

Zeeco stocks a wide variety of oil gun parts for your combination or oil fired burners. Whether you are using steam, air or mechanically atomized oil guns Zeeco has the tips, atomizers, spuds, collars, oil bodies, receivers and gaskets for your application.

Zeeco oil gun receivers, clevis handles, oil gun bodies, and oil gun inserts are designed as well as manufactured to have a long operating life span.

gfk-oilgun02

Burner Tile

Zeeco can supply a wide selection of gas fired or oil fired burner tiles to meet your application.

The ZEECOLITE tile meets fundamental criteria for consistent burner performance, energy efficiency, and firebox reliability over a long service life.

gfk-burner-tile-1

Burner Pilots & Pilot Components

Zeeco provides complete replacement pilot assemblies for all types of burners. Regardless of the burner manufacturer, we can supply a replacement for manual and/or electronic ignition systems, flame rods, air/gas ignitors, or torches.

Zeeco can furnish a wide variety of insulators, feed-throughs, extension rods, flame rods, and ignition rods used on pilot ignition systems.

ZEECO mixer assemblies, orifices, spuds, and air doors are available for your burner pilots and your flare pilots.

Zeeco pilot tips for burner applications are engineered to meet the stringent requirements of our clients. In addition to Zeeco replacement pilot tips, we can also provide replacement tips for other manufacturers’ equipment. 

 

gfk-pilotsandpilot-components3

Ignitors / Torches

  • Zeeco’s HHI hand-held electric ignitor delivers a spark to manually ignite burner pilots. The HHI can be manufactured to any length to meet specific requirements.
  • Our HHT hand-held torch operates on propane or MAPP gas and provides an instant on/off trigger for fuel savings and convenience. A built-in venturi generates a better, more consistent flame. The HHT is available in three standard sizes: 36", 48" and 66". Custom lengths also are available.
gfk-sm-Hand-Held-Electric-Ignitor

MARKETS WE SERVE

Zeeco can provide combustion and emissions control solutions wherever hydrocarbon processing takes place. Customers can find our equipment and services in upstream, midstream, and downstream oil and energy processes.

We also offer products and support for other industries and applications such as tank/terminal loading and storage, pharmaceutical, carbon black, pulp & paper, steel, food processing, and more.