Utility Boilers
CATEGORIES:
Zeeco Firing Systems, Products, and Services for Utility Boilers
PRODUCTS FOR STEAM AND PROCESS
Burners
GLSF Free Jet Ultra-Low NOx Burners
GB Low NOx Dual Fuel Burner
Register and Venturi Style Retrofit Burners
Fluid Bed Start-Up Burners and Gas Lances
Over Bed / Over Stoker Start Burners and Support Burners
DB-LN Duct Burners
Utility and Industrial Burner Systems
Forced Draft Fans
Windbox
Fuel Trains
Burner Management System (BMS)
Combustion Control Systems
Over-Fire Air Systems
Flue Gas Recirculation (FGR)
Scanner Systems
Pilots / Ignitors
Flexible Ignition / Warm-Up Guns for T-Fired Units
Class 1 Gas / Oil Pilots and Warm-Up Guns
Class 2 Gas / Oil Burner Support Pilots
Class 3 Gas / Oil Pilots with HE capability
Class 3 Special HE Only (Rigid and Flexible)
Optimization Kits
Z-Jet Low NOx Kits (Gaseous and Liquid Fuels)
Ultra-Low Steam Usage Atomizers and Tips
Safety / Control Systems
Solid State
Programmable PLC
Single Point, Parallel Point
Fully Metered Cross Limited Control
O2 Trim, VFD Fan Draft Control
Flexible Fuel Capability
Natural Gas
No. 6 Fuel Oil
No. 2 Fuel Oil
Blended Oils
Refinery Gases
Waste Oils
Opportunity Fuels
Low Btu Gases
Blast Furnace Gases
Coke Oven Gases
Landfill Gases
High-Viscosity Fuels
SERVICES
On-Site Technical
Start-Up
Installation Supervision
Preventative Maintenance
Service Contracts
Operator Training
Aftermarket Parts
Flow Modeling Center
Physical and CFD Modeling
Combustion Air Systems
Flue Gas Recirculation Systems
Over-Fire Air Systems
Exit Gas / Stack Modeling
Selective Catalytic Reduction
Engineering Studies
Environmental Compliance
Efficiency Audits
Fuel Conversions
Capacity Increase
Carbon Footprint Reduction
Turnkey
Coordinating Supply
Equipment Modification
Demolition / Installation
Start-Up
Operator Training
Site Management
Primary / Secondary Air Systems Flue Gas Flow Modeling
Physical and CFD
Combustion Air Systems
Flue Gas Recirculation
Over-Fire Air Systems
Exit Gas / Stack Modeling
Selective Catalytic Reduction
Pressure Drop Reduction
Increase Efficiency
Comprehensive Engineering Studies
Environmental Compliance
Efficiency Audits
Fuel Conversions
Capacity Increase
Carbon Footprint Reduction
Burners
T-Fired and Wall Fired Burner Systems
Ultra-Low and Low NOx (all fuels)
Retrofit Kits
High Efficiency
Opportunity Fuels
- Landfill Gas, Waste Gas
Firing System Optimization
Pilots / Ignitors
Flexible Ignition / Warm-up Guns for T-Fired Units
Class 1 Gas / Oil Pilots and Warm-Up Guns
Class 2 Gas / Oil Burner Support Pilots
Class 3 Gas / Oil Pilots with HE capability
Class 3 Special HE Only (Rigid and Flexible)
Services
Full Turnkey Services
Coordinating Supply
Equipment Modification
Demolition / Installation
Start-Up
Operator Training
Site Management
Optimization Kits
Z-Jet Low NOx (Gaseous / Liquid Fuels)
Ultra-Low Steam Usage Atomizers and Tips
Flame Scanners
- UV / IR Flicker Frequency
Flexible Fiber Optic
Visible Light
Liquid Fuel Atomizers
Waste Oils
Blended, Light, Heavy Oils
Safety / Control Systems
Solid State
Programmable PLC
Single Point, Parallel Point, Fully Metered Cross
Limited Control
O2 Trim, VFD Fan Draft Control
Fuel / Air System Upgrades
Cost-Effective Solutions
Download Brochure