Subscribe to Zeeco Updates

Focus on Flare Pilots

By Clayton A Francis on June 5, 2018

Clayton A. Francis, Zeeco Inc., USA, discusses the requirements of modern flare pilot detection..

Read More >>>

Zeeco opens new office in Louisville, expands vapor control testing ...

By Zeeco on November 14, 2017

USA – BROKEN ARROW, OKLAHOMA – Zeeco, Inc., today announced its Louisville, KY location is fully..

Read More >>>

Get Some Fresh Air

By Kyle D Shotts on August 4, 2017

Kyle D. Shotts, Zeeco Inc., USA, outlines the company's recent work designing a retrofit air..

Read More >>>

Zeeco Calls Its New Direct Flare-Monitoring Technology a ...

By Rhett Morgan, Tulsa World on August 1, 2017

Broken Arrow, Oklahoma – A global manufacturer of combustion and environmental equipment is taking..

Read More >>>

Flaring Up

By Kirsten Berg on July 24, 2017

Kirsten Berg, Zeeco Inc., USA, outlines specific design considerations for flaring in ammonia and..

Read More >>>

End-to-End Emissions

By John Soderstrom and Doug Allen on June 2, 2017

John Soderstrom and Doug Allen, Zeeco Inc., USA, examine the end-to-end emissions reduction..

Read More >>>

Keeping Control of Vapour

By Simon Shipley on June 1, 2017

Simon Shipley, Zeeco Europe Limited, UK, discusses the decision between two common vapour control..

Read More >>>

Retrofitting Crude Furnace Burners

By Ryan Roberts on May 15, 2017

A burner retrofit has delivered more robust operation with reduced NOx emissions from a crude..

Read More >>>

Flaring in Stages

By Esther Bruce and Nikki Jenlink on November 30, 2016

Esther Bruce and Nikki Jenlink, Zeeco Inc., USA look at staged flare designs for LNG applications.

Read More >>>

Taking the Physical Approach

By Jay Richardson on November 14, 2016

Today, modeling air flow usually implies using computational fluid dynamics software. But physical..

Read More >>>

Withstanding the Wind

By Joseph D. Smith, Missouri University of Science and Technology, Robert Jackson, Vikram Sreedharan and Ahti Suo-Anttila, Elevated Analytics,LLC on October 26, 2016

Scot Smith and Doug Allen, Zeeco, Inc., Joseph D. Smith, Missouri University of Science and..

Read More >>>

Solid Fuel to Natural Gas Conversions for Circulating Fluid Bed ...

By Bill Gurski, John Guarco, and Nando Nunziante on October 15, 2016

Recent discoveries of vast natural gas reserves across the world have led to increased natural gas..

Read More >>>

Scorching Solutions: ZEECO FlareGuardian™

By Scot Smith and Christopher Filoon, Zeeco, USA on June 24, 2016

Scot Smith and Christopher Filoon, Zeeco, USA, explain how the employment of direct flame..

Read More >>>

Controlling Emissions in the Production Process

By Sean MacLeod on March 28, 2016

Sean MacLeod, Zeeco, Inc. USA, discusses the many options available to help meet the regulatory..

Read More >>>

Vapour Recovery: Realising Your Recovered Product

By Simon Shipley on March 10, 2016

Simon Shipley, Business Manager for Vapour Recovery with Zeeco Europe Limited

Read More >>>

A Flare for the Dramatic

By Scot Smith on January 25, 2016

Scot Smith, Zeeco, Inc., USA, describes how the emissions testing of sonic velocity flares..

Read More >>>

Vapour Recovery Developments in Emission Standards and Applications

By Simon Shipley on July 31, 2015

Throughout the world today, vapour recovery systems are a common sight at distribution terminals..

Read More >>>

Flare System Regulations

By Clayton A Francis on May 25, 2015

Clayton A. Francis, Zeeco, USA, outlines the potential consequences of proposed legislation to..

Read More >>>

Practical Flare Gas Recovery

By Brian Blackwell, Trevor Leagas, and Greg Seefeldt on January 26, 2015

Brian Blackwell, Trevor Leagas, and Greg Seefeldt, Zeeco, Inc., USA, discuss practical flare gas..

Read More >>>

Retrofitting for Lower Emissions

By Rex K Isaacs on September 15, 2014

Rex K. Isaacs, Director of Burner Products, Zeeco USA, LLC, discusses the use of compact design..

Read More >>>

A World Leader in Clean Combustion and Environmental Systems Takes ...

By Zeeco on July 7, 2014

JULY 2014 – Nigel Palfreeman, a 25-year resident of Stamford, takes his community roots seriously...

Read More >>>

Middle East Flaring Solutions

By Clayton A Francis on May 20, 2014

Zeeco Applications Engineer Clayton A. Francis details the High Pressure Air Assist System (HPAAS)..

Read More >>>

Ultra-Low NOx Burners in Methanol Plants

By Rex Isaacs, Ryan Roberts, and Nigel Palfreeman on December 2, 2013

Zeeco’s own Rex Isaacs, Ryan Roberts, and Zeeco Europe’s Nigel Palfreeman review the engineering..

Read More >>>

Heat Recovery

By Kirk Wesselowski on September 20, 2013

Zeeco’s Kirk Wesselowski discusses the proper application of preheaters and oil heaters for thermal..

Read More >>>

Flare Impact Mitigation

By Scot Smith, Nigel Palfreeman, and Greg Seefeldt, Zeeco, and Mazen Mashour, Saudi Aramco on July 9, 2013

Zeeco’s own Scot Smith, Nigel Palfreeman, and Greg Seefeldt, in collaboration with Mazen Mashour,..

Read More >>>

Understanding Thermal Oxidisers

By Peter Pickard and Kevin McQuigg on June 17, 2013

Zeeco’s own Thermal Oxidiser Experts Peter Pickard and Kevin McQuigg, discuss the common design..

Read More >>>

Flame Interaction and Rollover Solutions in Ethylene Cracking Furnaces

By Rex K Isaacs on June 12, 2013

Zeeco’s Director of Burner Products, Rex Isaacs, explains the importance of flame, fuel, and lower..

Read More >>>

15 Questions

By Zeeco on November 8, 2012

15 Questions with Darton Zink, President and CEO, Zeeco, Inc.

Read More >>>

Emission Statement

By Nigel Palfreeman, Ryan Roberts, and Greg Seefeldt on November 5, 2012

Zeeco takes a look at refinery combustion equipment using the latest emissions control..

Read More >>>

When the Heat Is On

By Caleb Hurd and Tom Farmer on September 7, 2012

Zeeco’s own Caleb Hurd and Tom Farmer discuss how to achieve efficient flaring at various flow..

Read More >>>
PREVIOUS ||| 1 | 2 | 3 ||| NEXT